How To Cleaning Glass With Rubbing Compound

12-02-2011,11:46 PM

Would similar to know what tin can I do for my windshield, it is filthy I tried regular glass cleaner but I all the same have some caked on dirt and some windshield wiper marks does non wait like scratches.
I have my PC and my GG 3inch orbital I do have the windshield white pads that are for use with the GG three Inch but demand to know tin can I use
M105 or Megs Ultimate compound
I likewise have 3M Rubbing compound
tin can I use these or if you lot guys have before will this work to make clean up my Windshield ?

thank you

12-03-2011,12:02 AM

you can use any compound you wish if you get hazing switch to less aggressive pad or polish. will work great to clean it upwards, for me even helps lighten "wiper brume" of course thats depending on chemical compound ect....give it a try. you tin can use any polisher you want 3" would give you more cut as its a smaller pad and can run at a higher OPM. just brand slow passes slower then you would for paint. just dont overheat the glass (shouldn't happen with a DA) if you over heat the glass the plastic in the center of the windshield melts and distorts windshield....a rotary is sort of better for drinking glass polishing but if y'all're just starting out and then a DA is fine...expert luck and hope it works out for you!

12-03-2011,12:03 AM

I'd propose DG 501 only you might want to wait to run across Car Pro'southward CeraGlass polish. It looks promising. Corey'southward gonna do a review on it.

12-03-2011,12:10 AM

Quote Originally Posted past opie_7afe View Post

you can apply any compound you wish if you get hazing switch to less aggressive pad or smooth. will work great to clean information technology up, for me even helps lighten "wiper haze" of course thats depending on compound ect....give it a attempt. you lot tin use any polisher you want 3" would give you more cut as its a smaller pad and tin can run at a higher OPM. just make slow passes slower then you lot would for pigment. just dont overheat the glass (shouldn't happen with a DA) if y'all over estrus the glass the plastic in the middle of the windshield melts and distorts windshield....a rotary is sort of better for glass polishing but if you're merely starting out then a DA is fine...good luck and hope it works out for you lot!

Thanks for the advice opie will becareful

Quote Originally Posted by richy View Post

I'd suggest DG 501 but you might want to wait to run into Automobile Pro's CeraGlass polish. It looks promising. Corey's gonna do a review on information technology.

sounds good when is it coming out Richy ?

12-03-2011,12:xv AM

I utilize m205/tangerine ht pad and got all the hard h2o spots out worked great I'm certain m105 will piece of work as well

12-03-2011,12:25 AM

m105 with a light cutting pad (orange LC or cyan HT) works very well to clean upward glass, but apparently volition NOT remove scratches. CeriGlass is looking promising for removing scratches, and should exist in stock at AG very soon. Y'all don't have to worry about distorting glass with a DA. Even so a rotary is a different story.

12-03-2011,12:36 AM

Quote Originally Posted by ryanmcg1 View Post

I use m205/tangerine ht pad and got all the hard water spots out worked great I'm sure m105 will piece of work as well

yeah information technology is pretty bad just been neglected will try the 105 showtime. Thanks Ryan

Quote Originally Posted by DARK Equus caballus View Post

m105 with a low-cal cutting pad (orange LC or cyan HT) works very well to clean up glass, simply obviously will NOT remove scratches. CeriGlass is looking promising for removing scratches, and should be in stock at AG very soon. You don't have to worry near distorting drinking glass with a DA. Nonetheless a rotary is a different story.

would similar to endeavor that production shortly as its available I have the 5.5 LC pads Orange for the m105 and was thinking about the 205 later should give a nice polish finish what do you think Dark Horse?
Thanks

12-03-2011,12:51 AM

Quote Originally Posted by Louie_Blu View Post

aye it is pretty bad just been neglected volition endeavor the 105 first. Thanks Ryan

would like to try that product presently every bit its available I have the 5.five LC pads Orange for the m105 and was thinking about the 205 subsequently should give a nice smooth stop what do you lot call back Night Equus caballus?
Cheers

I've cleaned up MANY windshields (NOT removing scratches) with m105, and never found a reason to have to follow with m205 or whatsoever other shine. Glass is VERY difficult and I have found that it doesn't require multiple steps similar paint does. I make clean it with Stoners drinking glass cleaner (or your favorite glass cleaner), dirt it, polish it with m105, employ IPA to remove all m105 residue, and seal it with either Aquapel, CQ, OC, or OG. This works VERY well!

12-03-2011,07:21 AM

Glass is VERY difficult and normal compounds and polishes will only clean and not induce additional defects.

Tad, (Dark Equus caballus) has offered a nice solution and should better your windshield quite a scrap.

Washing

First by giving information technology a thorough washing and cleaning to remove all soluble contaminates. Then mask off any trim to avert damaging or staining information technology.

Clay

Yous clay the cease why not the glass?

Polish

Meguiar'south M105 or any ambitious compound in this category on an orange or white foam pad will work well. Set the machine speed to four or then and go over the entire drinking glass and y'all would correcting the paint.

Washing

Once you lot're satisfied wit the results launder the drinking glass removing all the polishing rest then thoroughly clean with a good grade cleaner and Microfiber waffle drinking glass towel. Ensure that y'all've removed all the streaks and haze.

Protection

Your glass benefits from added protection similar to the paint. I've used Aquapel with outstanding results. Some of the new hard coatings work well here and volition provide boosted protection.

Drinking glass Care

There are glass specific products that actually smooth and remove fine imperfections in the glass.

Clean your auto windshield and windows to a streak-free smoothen with a quality automobile glass cleaner from Autogeek! Ammonia-free, no streaks, DP Krystal

12-03-2011,07:27 AM

I full general always following the manufactures recommendation on the bottle or tin.

99% of the time I let information technology haze but applying at temperatures below 50 degrees really slows down the hazing and I've using it as a wipe-on / wipe-off wax.

I apply Collinite 845 using my Porter Cable 7424 polisher and a red pad, This allow me to get it super thin which makes buffing very easy hazed or non...

S	M	T	W	T	F	S
		one	2	three	4	5
6	seven	viii	ix	10	eleven	12
13	fourteen	fifteen	sixteen	17	18	19
20	21	22	23	24	25	26
27	28

How To Cleaning Glass With Rubbing Compound

Thread: Windshield Cleaning, Compound or not ?

Windshield Cleaning, Compound or not ?

Re: Windshield Cleaning, Compound or not ?

Re: Windshield Cleaning, Chemical compound or not ?

Re: Windshield Cleaning, Compound or not ?

Re: Windshield Cleaning, Compound or non ?

Re: Windshield Cleaning, Chemical compound or non ?

Re: Windshield Cleaning, Compound or not ?

Re: Windshield Cleaning, Compound or not ?

Re: Windshield Cleaning, Chemical compound or not ?

Re: Windshield Cleaning, Compound or non ?

Similar Threads

Members who have read this thread: 1

Posting Permissions

» February 2022

0 Response to "How To Cleaning Glass With Rubbing Compound"

Post a Comment

Iklan Atas Artikel

Iklan Tengah Artikel 1

Iklan Tengah Artikel 2

Iklan Bawah Artikel